Highlight:
Metallurgy sanding station downdraft table
, Professional sanding dust collection table
, Polishing downdraft table dust collector
Professional Sanding Station Downdraft Table Polishing Table Dust Collector For Metallurgy
Professional Dust Downdraft Table Sanding Polishing Table Dust Collector For Metallurgy
1. Installation Instructions
(1) It should be used on a firm and flat ground to avoid noise caused by the machine shaking.
(2)When using the machine, please pay attention to whether the voltage of the power supply is compatible with the machine, and do not share a socket with other electrical appliances.
(3) Do not tilt the machine more than 45 degrees when moving or carrying it.
(4)When using the machine, please pay attention to keep a space of not less than 50cm-100cm around the machine.
(5)The operation of the equipment is simple, in the control system of the equipment within the faceplate has been adopted intelligent design, turn on the power switch can start to work, after the operation is completed turn off the power switch.
(6)Wiring three fire one zero.
2. Parameter Description
Take QD-DM2000 model for example:
| Air Volume |
3000m3/h |
Power |
3kw |
| Power |
380V, 50HZ(optional) |
Filter Cartridge |
Φ325*500mm, 3 pcs |
| External Size |
2000*1000*800mm |
Cleaning Method |
Pulse Valve |
| Pulse Valve |
1.0 inch, 3 pc |
Noise |
<85 dB |
| Purification Efficiency |
99.97% |
|
|
3. Maintenance Instructions
Equipment in the process of processing according to the workshop production equipment specifications, in order to ensure production safety and operational stability of the situation for each part and the system for a number of experiments before being put into use. The equipment itself has no wearing parts, no special attention in the use of the process. Each system has been installed with safety guarantee at the completion of the equipment. Consumables are supplied by us and replaced by the workshop operator after switching off the power.
Please observe the following when carrying out repairs and maintenance:
(1) When cleaning the machine casing, replacing parts or changing the working condition, the machine must be switched off and unplugged from the power supply.
(2) Avoid squeezing and dragging or any other way to damage the power cord. And regularly check whether the power cord is damaged, if there is any damage to the power cord, you should immediately stop using the machine and have it overhauled by a professional to replace the damaged power cord, etc.
(3) Storage of the machine: when the machine is not in use, it should be placed in a dry room to avoid sun and rain.
(4) The machine needs to clean the filter cartridge from time to time to prevent clogging and affect the effect of vacuuming.
(5) According to the cleanliness of the environment, replace the filter regularly (generally 3-6 months).
4. FAQ
Q: Are you a trading company or a manufacturer?
A: We are a manufacturing company. We are a professional manufacturer of dust removal and conveying equipment with more than 20 years of production.
Q: Where is your factory located?
A: The factory is located in Hebei, China, 50 minutes by rail from Beijing.
Q: Do you offer OEM services?
A: Yes. Any required logo is available.
Q: What is the production capacity of your company?
A: Our factory covers an area of more than 20,000 square meters and produces 2,000 machines a year.
Q: What certificates do you have?
A:CE / ISO / SGS
Your message must be between 20-3,000 characters!
